Breaking Strength | ASTM D5034 | 1-2 days | 12" x Full |
Tearing Strength | ASTM D2261 | 1-2 days | 12" x Full |
Yarn Slippage | ASTM D4034 | 1-2 days | 12" x Full |
Woven - Elongation | Joint Industry Chapter 10 | 1-2 days | 18" x Full |
Knit - Elongation | Joint Industry Chapter 10 | 1-2 days | 18" x Full |
Dynamic Seam Fatigue Test | Joint Industry Chapter 22 / ASTM D4033 | 1-2 days | 54" x Full |
Surface Abrasion | | | |
Wyzenbeek | ASTM D4157 | Pending number of cycles | 12" x Full |
Martindale | ASTM D4966 | Pending number of cycles | 12" x Full |
Resistance to Pilling | | | |
Brush | ASTM D3511 | 1-2 days | 12" x Full |
Martindale | ASTM D4970 | 1-2 days | 12" x Full |
Dimensional Change | | | |
Water | ASTM D3597 Section 6.5 | 1-2 days | 18" x 18" |
Solvent | ASTM D3597 Section 6.5 | 1-2 days | 18" x 18" |
Colorfastness to Water | AATCC 107 | 1-2 days | 6" x 6" |
Colorfastness to Solvent | AATCC 107 / modified | 1-2 days | 6" x 6" |
Colorfastness to Light - Xenon | AATCC 16.3 | 20 hours/day | 6" x 6" |
Colorfastness to Crocking | AATCC 8 | 1-2 days | 12" x 12" |
UFAC/NFPA 260 | UFAC/NFPA 260 | 1-2 days | 18" x Full |
California Technical Bulletin | 117-2013, Section 1 | 1-2 days | 18" x Full |